Modern LED for parking lots, building exteriors, canopies, and parking structures. Improved visibility, reduced energy, lower maintenance — with motion controls that push savings to 80%.
GET FREE SITE ASSESSMENTParking lots and building perimeters often run 10–14 hours per night, 365 days a year. Legacy high-pressure sodium and metal halide fixtures use 250–1000 watts each, require warm-up time, and fail frequently — creating both energy waste and maintenance headaches.
LED area lights and wall packs deliver equivalent or better illumination at 60–80% lower wattage, with 50,000+ hour rated life. Add motion sensing and you cut runtime energy even further.
From wall packs to pole-mounted area lights — we cover every application with the right LED solution.
LED area lights for surface parking lots and large paved areas. Shoebox and decorative styles. Photocell dusk-to-dawn operation with optional motion step-down.
Building-mounted LED wall packs for perimeter and back-of-house illumination. Cutoff optics minimize light trespass. Replaces aging HPS and MH wall packs.
Recessed and surface-mount LED for gas station canopies, drive-throughs, loading dock overhangs, and covered walkways. Uniform coverage without glare.
LED fixtures rated for damp/wet locations for covered and open parking decks. Vapor-tight options for enclosed structures. Motion sensing per bay.
LED bollards, step lights, and low-level pathway fixtures for pedestrian areas. Improves wayfinding and safety while maintaining a welcoming aesthetic.
High-output LED flood lights for building security, perimeter coverage, and loading areas. Instant-on response to motion sensors — critical for security.
Exterior areas are well-lit but frequently empty. Motion step-down controls maintain a reduced baseline output (typically 20–30%) when no activity is detected, then step to 100% within seconds of motion detection.